Parts & Accessories
$150.00 - $160.00
- Outer pad is constructed of 600D + PVC. A durable denier fabric with herringbone weave and DWR treatment for water repellency - Micro-brushed inner lining protects your tailgate from rub and wear marks - Raised bumpers facing into the truck box seat most frames snugly preventing bikes from coming into contact while shuttling - Raised square pads along the outer tailgate (small pad only) offer the additional security of holding forks in place - When the shuttle gets steep and rowdy, secure frames down with a Velcro-backed webbing loop and strap system - Grommet system offers the ability to lock bikes - Storage pocket - Two sizes - Small - 39.5" x 57" wide with 5 straps, Large - 47” x 61” wide with 6 straps
$79.99 $99.99 20% Off
Add Saris' Freedom Long Wheelbase Bar to your Saris Freedom rack (sold separately) to carry an extra long wheelbase bicycle like a tandem or recumbent. The rack holds two bikes of up to 35 pounds each, and the Long Wheelbase Bar holds a bike that measures up to 57 inches axle to axle.
$41.59 $51.99 20% Off
Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).
$34.39 $42.99 20% Off
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
$32.79 $40.99 20% Off
Saris' Locking Cable 8' keeps your bike and rack where you want them: attached to your vehicle. This braided, stainless-steel cable is 8-feet long for plenty of reach. Plus, the vinyl coating protects your vehicle's and bike's finish.
$31.99 $39.99 20% Off
Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).
A fork hitch for bike transportation that allows for versitle mounting options on any flat surface. - Pre-aligned positioning for easier fork installation - Remove Boost 15 x 110mm insert to accommodate 20mm axles - Easy mounting to any flat surface - Rust-free Aluminum construction - The platform is 3.75 x 1.5" and the holes are 3" center to center Compatible with following: 15 x 110 mm (Boost, silver insert) 15 x 135 mm (Borealis, Fatback, 9zero7 + other Fat Bike forks) 15 x 142 mm (Salsa + others) 15 x 150 mm (Rock Shox Bluto Fork + others) 20 x 110 mm
Delta's pre-aligned positioning bike hitch allows for easy fork installation. It features special anti-rust treatment with a tough powder-coat finish. This ultra-rigid 9mm skewer allows you to easily carry your front wheel with a Delta Wheel Hitch or Wheel Holder (each sold separately). - Pre-aligned positioning for easier fork installation - Special anti-rust treatment with tough powder-coat finish - Features patented Delta locking lever - Base Dimensions 4" x 1.5" x 1.75" - Mounting Holes 3" center to center - Ultra-rigid 9mm skewer - Carry your front wheel with a Delta Wheel Hitch (sold separately)
$23.99 $29.99 20% Off
Saris' Trap Fork Mount can be bolted anywhere you need to hold a bike. It secures your bike's fork dropouts with a stout 9-mm quick-release skewer. The Trap is made of powder-coated, light, durable aluminum. A hole in its body allows your bike to be locked with a cable (sold separately).
$19.99 $24.99 20% Off
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.
$12.79 $15.99 20% Off
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.
$10.39 - $11.19 $12.99 - $13.99 20% Off
Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.
$8.79 $10.99 20% Off
Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.
Swagman's Barracuda Bike Mount carries one bike in an upright position so that you don't have to remove the wheels and it fits onto square or round, and up to 2-inch wide OEM load bars (load bars sold separately). This fine steel/composite bike mount has shaped wheel holders that help keep the bicycle upright for easier bike loading/unloading, and it holds bikes with tires from 1- to 2.02-inches wide. The rack's upright arm securely and safely holds the bicycle by its frame, while 2 straps keep the wheels in place. You'll also love the built-in locking mechanism that secures the bike to the mount and the mount to the load bars.
Swagman's Bike Cover quickly and easily covers up to 2 bikes on a rear rack, with its large zip opening. It's made of water-resistant polyurethane-coated nylon, and it has cinch straps for a streamlined fit.
Swagman's Fork-Down Roof Rack Bike Mount is attached to a roof rack's load bars (sold separately) to carry one bicycle by its fork (the front wheel is removed). The Fork-Mount has a fork block and rugged 9mm-diameter quick release to safely hold your bicycle upright and a wheel strap to secure the rear wheel. This fine bike mount fits on square, round and oval load bars up to 3 inches wide.
Swagman's Ladder Rack Bike Cover quickly and easily covers up to 2 bikes on an RV ladder rack, with its large zip opening. It's made of water-resistant polyurethane-coated nylon, and it has cinch straps for a streamlined fit.
Swagman's R-100 Roof-Mount Load Bars fit most cars with raised side rails. The cross bars are made of light, corrosion-resistant and durable aluminum and the ends are made of a tough composite material to safely and securely grip your vehicle. These load bars have a capacity of 75 to 100 pounds and they accept Swagman's upright and fork bike mounts (sold separately). The R-100 features locking mechanisms, too.
Swagman's The Claw Fork Mount is a handy way to carry one bicycle in the bed of a pickup or back of an SUV. You bolt it to the bed (or a heavy piece of wood) and simple remove your bicycle's front wheel and clamp your fork in The Claw to safely and securely hold up and carry your bike. The Claw is made of steel and aluminum for durability and long life and it has a quality quick release for easy use. You can also use The Claw for hanging bicycles on the wall for home storage. With multiple Claws you can carry/store as many bikes as you want.
Swagman's X Mount Wall Mount Bike Rack Hanger is a heavy-duty and attractive hanger that you mount to the wall and hang your hitch/receiver rack to when it's not on your vehicle. This gets it up off the floor where it's out of the way and can't get knocked over, damaged or run into. The X Mount accepts 1 1/4- and 2-inch hitch racks and it folds against the wall when the rack is removed.
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 6 SKS Cores and matching keys - 2 keys included plus a control key
Page 1 of 1